TAEK (Turkish Atomic Energy Authority) chose Pi’s ConductiSense for use in its TR-2 research reactor, which is the only active reactor in Turkey.
Pi’s Conductivity Meter was chosen as TAEK wanted to monitor conductivity values with immersion type probes at 3 different levels in a water tank; the surface level where regeneration water is pumped, the middle level at 3 metres, and the bottom level of the pool at approximately 10 metres. In discussion with Pi’s partner in Turkey, Thermomed, TAEK chose Pi’s multi-parameter CRIUS analyser with its on board data logging and communication options.
TAEK had previously been measuring conductivity as a kOhm unit with older devices. With the CRIUS ConductiSense, they are now able to measure conductivity in µS/cm. The CRIUS was installed with Modbus over Ethernet connectivity to TAEK’s control room, providing detailed information from the analyser.