Location Turf St, Burnley BB11 3BP

Email info@processinstruments.co.uk

Phone 01282 422835

info@processinstruments.co.uk

Water Treatment Controllers

Process Instruments not only makes the best analysers but also the best controllers. With the advent of Industry 4.0 and Water 4.0 distributed control is being seen as the future for water production and treatment. The Pi analyser have as options a range of control functions that are industry leading in their own right. PID and flow proportional PID with essential features such as overfeed protection, integral wind-up protection, min and max pump outputs etc. Pi’s multi-channel controllers can measure and control up to 16 measurands and provide remote access via the internet to your mobile or laptop allowing you to change settings wherever you are.

ConductiSense

Using a range of sensors The Pi ConductiSense is capable of satisfying the full range of requirements for water treatment controllers.

Conductivity Meter

DioSense HR

Industrial water treatment can require the use of chlorine dioxide. The generation of chlorine dioxide can require the measurement of high concentrations in order to control the generation reaction. The DioSense provides for the measurement and control of this high concentration.

High Range ClO2 Analyser

HaloSense

Used extensively in the water treatment industry, HaloSense residual chlorine monitors are used to measure and control the levels of free and total residual chlorine.

Chlorine Analyser

ORPSense

Redox or ORP (Oxidation Reduction Potential) is often used in industrial water treatment and can be a more reliable and cost-effective measurement than directly measuring an oxidant. The ORPSense from Pi has all the controls onboard that you might need to manage a water treatment application.

ORP Meter

pHSense

Choosing the right pH sensor and analyser and accessories combination is key to a reliable and trouble free pH measurement and control application. The pHSense from Pi is both simple and flexible for any Water Treatment application.

pH Meter

PeroxiSense

Use of hydrogen peroxide in the industrial water treatment market is unusual but not unheard of. In response Pi offers a membraned two electrode measurement sensor which when coupled with Pi’s award winning controllers provides for unrivalled measurement and control of Hydrogen Peroxide dosing.

Hydrogen Peroxide Analyser

Multi-Parameter Analyser

Multi-sensor, multi-parameter, multichannel analysers can greatly reduce the cost per point of any measurand including pH, residual chlorine, ORP, ozone, etc.

Multi-Parameter Analyser